Contact Us
NFPA
Building Codes
OSHA Fire Safety Information
OSHA Fire Safety Advisor
1.0a Software
Automatic
Fire Alarm
Association (AFAA)
|
Silent Knight
Addressable
Fire Alarm Control Panels
|
IntelliKnight
5820XL
Bring on the Power. Bring
on the Options. Bring on the Business.
Bring on the Knight!
It's the smartest
way to make the most of fire alarm technology. IntelliKnight
is the first fire alarm system to combine addressable value and
performance with exclusive built-in digital communication and distributed
intelligent power. There's no other system like it.
The modular design features
an easy-to-use interface that simplifies procedures. Plus, this
incredibly smart system can differentiate between smoke and dust
particles. With IntelliKnight, you'll be notified if you need the
fire department or just a maintenance crew. And you'll know exactly
where to find the problem.
The lntelliknight system
uses data from the sensors installed on the signalling line circuits
(SLC) to set sensitivity levels for each of the zones in the system.
In addition, the Model 5820XL uses the data to perform drift compensation
and sensitivity checks on each of the sensors in the system.
The IntelliKnight Model
5820XL can be expanded by adding modules such as the Model 5860
Remote Annunciator, Model 5815XL Signalling Line Circuit (SLC) Expander,
Model 5824 Printer Interface (for printing system reports), and
the 5895XL Intelligent Power Module. The Model 5820 also features
a powerful built-in dual line fire communicator that allows for
reporting of all system activity to a remote monitoring location.
FEATURES
- Up to 381 analog addressable points.
- Supports Class A configuration for
SLC (Style 6), SBUS, and Flexput circuits.
- Distributed, intelligent power.
- Drift compensation.
- Flexput I/O circuits.
- ANSI cadence pattern.
- Built-in annunciator with 80-character
LCD display.
- RS-485 bus provides communication
to system accessories.
- Built-in RS-232 interface for programming
via PC.
- Built-in digital communicator.
- Form C trouble relay rated at 2.5
amps at 24 VDC.
- Two Form C programmable relays rated
at 2.5 amps at 24VDC.
- Uses standard wire - no shielded
or twisted pair required.
System Application
The lntelliknight Model 5820XL control panel has one built-in Signalling
Line Circuit (SLC) which supports 127 devices. Two additional loops
can be added using the 5815XL SLC expanders to increase overall
capacity to 381 devices.
The Model 5820XL's SLC loops support
multiple device types:
- Addressable photoelectric sensor
- Addressable ionization sensor
- Addressable duct housing
- Addressable heat sensor
- Addressable Contact module
- Addressable Relay output module
- Addressable Notification Module
The following advanced sensor capabilities
are available using the lntelliknight Model 5820XL:
- Automatic drift compensation
- Maintenance alert
- Built-in sensor test to comply with
NFPA 72 calibration testing requirements
The Model 5820XL features a 5 amp power
supply. The IntelliKnight system features maximum battery charging
capacity of 33 amp/hours. An additional cabinet enclosure is required
for batteries in excess of 17 amp/hours. Flexput circuits
on the Model 5820XL control can be individually programmed to function
as notification circuits, auxiliary power outputs, or initiation
circuits that support both 2- and 4-wire smoke detectors.
The IntelliKnight system operates on non-twisted, unshielded cable
when wired in compliance with standard wiring practices as called
out in the National Electric Code 760 specifications for power limited
fire protective signalling cables. No special wiring is required.
The Model 5820XL provides seven preset
notification cadence patterns including ANSI 3.41 and four user
programmable selections for fire alarm notification. Two programmable
general purpose Form C relay outputs are provided on the Model 5820XL
FACP
Additionally, the IntelliKnight system
features a built-in walk test and auto-programming. Its innovative,
dead-front cabinet design has been designed for flush or surface
mounting. System maintenance is easy to perform.
Built-in Digital Communicator
The IntelliKnight Model 5820XL features a built-in UL listed digital
communicator for remote reporting of system activity and system
programming. The communicator has the ability to seize two telephone
lines to report alarms and troubles to a monitoring facility. The
communicator supervises two phone lines and will activate a trouble
signal if a line failure is sustained for more than 45 seconds.
Other communication features include: re-try if communication fails,
two phone number capability, download phone number capability and
touchtone or rotary dialing. The communicator is compatible with
SIA, Ademco Contact ID. The format is selectable by account number.
User Interface
The lntelliknight's built-in annunciator with 80 character LCD display
and large easy to-use tactile touchpad can be used for system operation,
programming and maintenance. It has five LEDs for alarm, supervisory,
system trouble, system silenced and system power. System operations
include silencing alarms and troubles, resetting alarms and the
display of alarm troubles and memory. The system's non-volatile
event history buffer stores 1,000 events for viewing from the built-in
or remote annunciator. System operation can be initiated with a
mechanical fire fighter's key or a valid 4- to 7-digit operators
code.
IntelliKnight 5820XL
Version 6.0 Installation and Operation Manual
IntelliKnight 5820XL Specification
Sheet
IntelliKnight 5820XL Operation
Card
IntelliKnight Battery
Calculation Worksheets
IntelliKnight 5820XL A
& E Specifications
IntelliKnight 5820XL Architect
Drawing and CAD Files
IntelliKnight 5820XL CSFM
Listings
Smoke Detector Cleaning
and Testing Instructions
5820XL Brochure and IntelliQuote
|
IntelliKnight®
Model 5808
Single Loop
Addressable Fire Alarm Control Panel
The
convenience of an addressable fire alarm control panel in a cost effective
easy to use package.
The IntelliKnight Model 5808
is a 127 point class leading single loop addressable fire alarm control/communicator
system that provides you with the revolutionary value and performance
of addressable sensing technology combined with exclusive, built-in digital
communication, distributed intelligent power, and easy to use interface.
Powerful features such as drift compensation and maintenance alert are
delivered to this powerful FACP from Silent Knight.
The lntelliknight 5808 performs
drift compensation and calibration checks on each of the sensors in the
system. The basic IntelliKnight 5808 system can be enhanced by adding
modules such as the Model 5860 Remote Annunciator, the Model 5824 Serial/Parallel
Interface (for printing system reports), and an Intelligent Power Module.
The Model 5808 also features a powerful built-in dual line fire communicator
that allows for reporting of all system activity to a remote monitoring
location.
FEATURES
- Up to 127 addressable points.
- Uses standard wire - no shielded or twisted
pair required.
- Built-in digital communicator.
- Central Station
Reporting by Point or Zone.
- Supports Class B (Style 4) and Class A
(Style 6) configuration for SLC.
- Distributed, intelligent power.
- Drift compensation.
- 13 pre-programmed output cadences, (including
ANSI-3.41), and 4 programmable outputs.
- Notification circuits can be configured
as 2 Class A (Style Z) or 4 Class B (Style Y), or auxiliary power for
resettable, constant, or door holder power.
- Built-in annunciator with 80-character
LCD display.
- RS-485 bus provides communication to system
accessories.
- Built-in RS-232 interface for programming
via PC.
- Built-in Form
C trouble relay rated at 2.5 amps at 24 VDC.
- Two Form C programmable relays rated at
2.5 amps at 24VDC.
Downloads:
IntelliKnight 5808 Installation
and Operation Manual
Download the
entire manual or download by section.
IntelliKnight 5808 Specification Sheet
IntelliKnight 5808 Operation
Card
IntelliKnight 5808 Battery Calculation
Worksheets
IntelliKnight 5808 CAD Files
IntelliKnight 5808 CSFM Listings
- 5808 CSFM Listing (Pending)
Smoke Detector Cleaning and
Testing Instructions
Conventional
Fire Alarm Control Panels
Introducing a family of conventional
panels that completely defies convention.
SK2224
A Simple, powerful, cost-effective
panel for basic fire protection applications.
Perfect for smaller commercial
building projects, Silent Knight's new SK-2224 2-zone fire panel is the
most capable, yet simple, small fire panel in the industry.
Capable because it is the only
2-zone fire panel that actually tests twice before triggering an alarm.
The Enhanced Smoke Verification feature allows the SK-2224 to run smoke
detectors and pull stations within the same zone, while still distinguishing
between the two signals. Plus, the SK-2224's robust 2.5 amp power supply
is more powerful than those of competitors' 2 zone panels.
Whether in a new project or
a retrofit, this NFPA-compliant panel is simple to install. It's also
easy to program with simple-to-operate DIPswitches. In addition, the panel
can be made even more powerful with optional remote annunciator and digital
communicator add-ons. The SK-2224 is one powerful little panel.
SK2224
FACP PDF Files
SK2224 Specification Sheet
SK2224 Installation Manual
SK2224 CSFM Listing
SK4224
The SK-4224 is a 4-zone 24-volt
conventional fire alarm panel with a powerful feature set that makes it
the most flexible, easy to use fire control panel available.
The SK-4224 has a 2.5 amp 24
VDC power supply, dedicated alarm and trouble relays, four Class B Style
B inputs and two 2.5 amp Class B Style Y outputs. These can be programmed
to operate as two Class A style D inputs with one 2.5 amp Class A style
Z output when Class A operation is desired. The panel also features
an innovative notification expansion input that allows the SK-4224 to
act as a 2.5 amp ADA notification expander! The SK-4224 is a class
leading control panel that provides a cost effective solution to your
fire control needs.
SK4224
FACP PDF Files
SK4224
Specification Sheet
SK4224 Installation Manual
SK4224 CSFM Listing
SK6324
The SK-6324 is a six-zone, 24-volt
conventional fire alarm panel. Simple to install and operate, this
is the state of the art in small fire control panels.
The SK-6324 provides a number
of powerful features. Six Class B initiation zones, three 2.5 amp
notification circuits, and a 2.5 amp power supply are standard features.
You simply cannot install more power for the money! Other standard
features include a half amp auxiliary power output for special applications
such as door holders; dedicated alarm and trouble relays; easy to use
on-board annunciator; and a compact cabinet that can house up to two 7.0
AH batteries.
The SK-6324 is easy to configure
via dip switches, no programmers are required.
SK6324
PDF Files
SK6324
Specification Sheet
SK6324 Installation Manual
SK6324 CSFM Listing
5204
Silent Knight's 5204
is compact and easy to install and service, delivering features you'd
expect to find in systems costing much more.
The basic 5204 unit offers local fire alarm
control for up to four zones and central station communications with the
optional UL listed Model 5205 Digital Communicator. The 5204 provides
3 amp current for external devices and two 1.5 amp supervised notification
circuits. The system is compatible with both 2- and 4-wire smoke
detectors.
The 5204 includes an annunciator inside the
cabinet for annunciation and operation. LEDs are visible without
opening the cabinet. Operation keys include SILENCE, DIALER RESET,
and DISPLAY TROUBLES.
Remote annunciation is available through
the optional Model 5230. This four-wire annunciator can perform
the same operation as the main system annunciator and features English-language
LCD display.
Features
- The 4 Class B (Style B) zones are interchangeable
to Class A (Style D) using the Model 7181 Zone Converter
- Fuseless design reduces service calls
- Field selectable 24 or 12 VDC power supply
- 3 amp current output available for external
devices
- Compatible with 2- and 4-wire smoke detectors
as well as water flow and sounding devices
- Two 1.5 amp supervised notification circuits
programmable for steady, pulsing, temporal, supervisory
- Auxiliary outputs of 1.5 amp at 12 or
24 VDC and 175 mA at 12 VDC (only)
- Smoke verification, pre-alarm delay and
cross-zoning minimize false alarms
- Two general purpose relays (2.5A dry contact
form C)
- Optional plug-in UL Listed digital communicator
(Model 5205)
- Up/downloading (reduces service time)
- Programmable from on-board touchpad or
optional remote annunciator
- Accu-Zone diagnostics
5204
FACP PDF Files
5204 Specification Sheet
5204 Installation Manual
5204 CSFM Listing
5207
The Silent Knight Model 5207 is an all-in-one
fuseless local fire evacuation control panel and digital communicator
designed for applications requiring manual fire alarm, automatic fire
alarm and water flow for sprinkler system supervision. The basic unit
offers fire alarm for one to eight zones, expandable to 16 with the optional
5210 expansion module. It is compatible with both two- and four-wire smoke
detectors. Compact, easy to install and service, it delivers the features
you'd expect to find in fire systems costing much more.
During normal operation, the 5207 constantly
checks smoke and other sensing devices for fire conditions. It also conducts
system checks to determine if any troubles, or system problems, exist.
If the 5207 encounters a fire or trouble condition, it sends a report
to a central monitoring station (if applicable), and, typically, sounds
an audible/ visual warning in the local area.
The 5207's microprocessor constantly runs
programs to check inputs and carry out other routine functions. If the
program ever stops running, a watchdog circuit will detect it and reset
microprocessors to resume normal operations.
The Model 5207 conducts an automatic self-test
every 24 hours-at a time you select-and sends a report to the central
station (if applicable).
Other features of the system include English-language
remote annunciation simplifying "Step Programming" of custom
options. Remote downloading of system configurations can eliminate the
expense of sending out a service technician for reprogramming. System
provides a built-in fire drill procedure. The exclusive Accu-Zone feature
measures and displays zone voltages, so you can set up and test the system
without separate testing equipment. Fuseless circuit board design eliminates
one of the most likely causes for service calls.
FEATURES
- Eight zones, 6 Style A (class B) and 2
Style D (class A). 8 Expander Zones are Style A (class B). Zones are
interchangeable using the Model 7181 Zone Converter.
- UL, FM, MEA (BSA), CFM Listed and Approved.
- Event memory.
- Fuseless design can reduce service time.
- Five amp current output at 24 volts.
- Compatible with 2- and 4- wire smoke detectors
as well as water flow and sounding devices.
- Easy to install, program and service.
- Four programmable (Style Y) supervised
signal circuits, including steady, pulse and temporal.
- Programmable smoke verification, pre-alarm
delay, and cross-zoning can minimize false alarms.
- Four general purpose relays (Form C 24
volts at 2.5 amps resistive).
- Built-in approved digital communicator
with UL required priority reporting.
- Flexible programming capabilities including
up/ downloading and use of remote annunciator. No "desktop"
programmer required.
- Accu-Zone diagnostics facilitate local
and remote troubleshooting.
- Individual zone Walk Test.
5207 FACP PDF Files
5207
Specification Sheet
5207 Installation Manual
5207 CSFM Listing
SK5208
The Fire Alarm Control
Designed to Grow with Your Systems Needs, Without The Growing Pains.
The SK-5208 is a microprocessor
based control panel with integrated UL listed communicator designed for
applications requiring smoke detection, manual pull stations, and sprinkler
supervision. It features an easy to read LCD display with programmable
English readout and user friendly tactile keys. The basic unit offers
10 zones of initiation and is expandable up to 30 zones for larger applications.
The SK-5208 has a complete line of supervised accessories that provide
remote annunciation and auxiliary relay expansion. Ideal for new and retrofit
applications.
FEATURES
- 10 zones, 8 Class B (Style B) and 2 Class
A (Style D) or 10 Class B (Style B) zones, expandable to 30 zones
- UL Listed
- Supervised zone expanders and I/O modules
can be mounted remotely from the main control panel
- Event History Buffer (150 date/time stamped
events)
- All zones are compatible with 2- or 4-wire
detectors
- 8 selectable/programmable output patterns
for notification appliance circuits
- Built-in Digital Alarm Communicator Transmitter
(DACT)
- 4 Notification Appliance Circuits
- 4 programmable general purpose relays
- Programmable smoke verification, pre-alarm
delay, cross zoning and enhanced verification mode features that can
help minimize false alarms
- Programmable from the built-in control
panel touchpad, remote annunciator, or Windows® downloading software
- Built-in walk test feature
Zone Expansion
|
|
SK-5217 10 Zone Expander
(2 maximum per system)
|
Annunciation
|
|
SK-5235 LCD Remote Annunciator
|
Status Display
|
|
SK-5280 Status Display
Module (8 maximum per system)
|
SK5208
PDF Files
SK5208
Specification Sheet
SK5208 Installation Manual
SK5208 CSFM Listing
Fire
Alarm Communicators
U.L Listed
DACTs
When digital communication
became an approved method of fire alarm signal transmission, Silent Knight
was the first to supply a digital communicator to the fire industry.
Model 5104
Fire Control Communicator
We know digital communication.
And, with hundreds of thousands of our communicators worldwide, it shows.
The Silent Knight Model 5104
is a four-zone fire control communicator providing digital fire reporting
over ordinary telephone lines, eliminating the need for costly leased
lines. It's UL 864 and NFPA 72 approved for monitoring local evacuation
controls.
As a stand-alone unit, it can
be used to monitor:
-
Sprinkler systems for waterflow,
supervisory, and gate valve tamper conditions.
-
Automatic fire detection
systems for structures that are not required to have a fire alarm
system but want property protection (e.g. to call the fire department
after hours).
-
Dry contact alarms, trouble
and supervisory outputs, then transmits a separate code for each.
The Model 5104 is fully supervised.
Its microprocessor constantly runs programs to monitor AC, standby battery,
zone inputs and telephone line connections. If a fault condition is detected,
it sounds a local trouble audible and reports the condition to the central
station. If one of the telephone lines faults for more than 45 seconds,
it will automatically switch to the other to report the failure.
The communicator will signal
activation, restoration and trouble conditions on any of four inputs.
If an application requires a different input configuration, the individual
input styles may be changed by using a Model 7181 Fire Zone Converter
Module. The 7181 also allows use of two-wire type smoke detectors, instead
of the normal fourwire contact type, for automatic fire detection applications.
FEATURES
-
UL 864 Listed for NFPA 72
Central Station and Remote Supervising Station Fire Alarm System Service.
-
Can be used as a stand-alone
or as UDACT
-
Four fully supervised inputs:
one Class A Subgroup Style D input, and three Class B Subgroup B inputs.
-
Downloadable for remote
programming.
-
Fuseless overload protection
with automatic reset circuitry and fault indicators - eliminates the
cause of most field calls.
-
Dual phone line interface.
-
Automatic self test every
24 hours with report sent to central station.
-
Reports in SIA and most
major communications formats.
-
60 hours of standby power.
-
Operates on loop start phase
lines ahead of the building PBX system.
-
A single, programmable output
is provided for alarm or dialer failed conditions (cannot be used
for evacuation purposes).
Downloads:
Model 5128
and Model 5129 4 Channel Slave Fire Communicator
We know digital communication.
And, with hundreds of thousands of our communicators worldwide, it shows.
Features
-
UL 864 listed for NFPA 71
and 72C
-
UL listed as slave communicator
for connection to UL listed 24 VDC local fire alarm control panels
-
Four fully supervised input
channels
-
Remote programming (up/downloading)
-
Dual phone line interface
and line fault monitors
-
Automatic 24 hour test
-
Reports in most major communication
formats
-
Compact size allows mounting
in most local controls, also available in metal cabinet (Model 5129)
Telephone Interface
The Model 5128/29 monitors and reports via two separate phone lines. Built-in
line fault monitors and a ring detector are provided.
The Model 5128/29 monitors and reports via two separate phone lines. Built-in
line fault monitors and a ring detector are provided.
AC Monitoring
An electrically isolated AC monitoring input is provided on the Model
5129. The input monitors the main power input of the local fire control
panel. The Model 5129 can be programmed to report AC trouble immediately
or report can be delayed from 6 to 12 hours.
Power Input
The Model 5128/29 communicator has been designed to be powered from a
UL-listed 24 VDC fire alarm control panel.
Audible Alarm
An on-board non-silencing audible alarm is provided.
Downloads:
|
| |
Our 9500
Single-Line Receiver is Dual-Line-Ready whenever you are.
9500 Dual Line Receiver
PDF Files
9500
Spec Sheet
The most advanced desktop receiver you can
buy. And, thanks to its hot, plug 'n play capability, it's also the most
affordable at expansion time. Simply pop off the top and plug in a line
card. No additional CPUs, no headaches, no hidden costs. Other receivers?
Grab a toolbox, a bottle of aspirin and your wallet. Plus, since we invented
the very first digital receiver, you're guaranteed superior call processing
no matter how many lines. Find out more about how our 9500 receiver can
help you grow without shrinking your bottom line.
Downloads:
9500 Specification
Sheet
9500 Installation
and Operation Manual
9500 Automation
Software
9800 Central
Station Receiver
Now, from the market leader
in digital communications technology, the next generation digital alarm
signal receiver. This compact new receiver provides you with state-of-the-art
technology for your alarm signal and data processing needs. The 9800 Receiver's
compact and efficient design allows from one to twelve line cards, and
phone lines, to be installed in a single receiver. Choose the receiver
of the future. Choose the 9800 Digital Alarm Signal Receiver from Silent
Knight.
FEATURES
- Handles up to twelve calls simultaneously
with one receiver housing.
- Single line card handles all major formats
including SIA and Ademco Contact ID.
- Software easily upgraded for future formats.
No hardware or software chip replacement.
- Easy to set up and program.
- Compatible with a broad range of automation
protocols.
Supported Formats
- SIA Digital Communication Standard
- ITI
- Ademco Contact ID, Express, Touchtone
- BFSK
- SK 3+1
- SK 4+2
- SK (FSK/FSK0/FSK80)
- SK (FSK1/FSK81)
- SK (FSK2/FSK86)
- Franklin 3+1
- Radionics Hex
- Sescoa 3+1, Super Fast
- Radionics 3+1+Checksum
- 3+1 Extended
- 4+1 Extended
- Acron Touchtone
- Radionics Modem II and Modem IIe
- Westec Formats (970, 1000, 2000, and 3000)
MCPU SYSTEM FEATURES
- Time/date - Military/European/AM PM
- Viewing and filtering of history information
- System events can be viewed separately
- Two available user profiles
- Supports 40 users
- Trap and listen-in capabilities
- Listen-in can be direct or PBX
- Printer Port
- Two RS485 expansion ports
- Two serial automation ports
AUTOMATION PROTOCOLS
- Silent Knight 9000
- SIA Computer Interface Standard (CIS)
- Silent Knight expanded
- ITI
Downloads:
9800 Specification
Sheet
9800 Installation
and Operation Manual
9800 Automation
Software
7150 Telephone Line Monitor PDF Files
7150
Spec Sheet
Model 7150
Telephone Line Monitor
The UL Listed 7150 Telephone
Line Monitor is a reliable answer to telephone line tampering.
The 7150 relay constantly monitors telephone
line DC voltage detecting shorted or open telephone lines. If the phone
line is cut or shorted, after a 40 to 60 second delay, it will activate
an LED indicator light and provide a N/0-N/C output. Its Form C relay
contacts can be used to activate a local alarm or a backup means of communication
to a central station such as long range R.F.
The 7150's high impedance prevents interference
with normal telephone operation. Its relay contacts will reset automatically
when phone line voltage is restored, but the LED will remain on until
the reset button is pressed.
Features
- Monitors telephone lines without interfering
with normal telephone operation.
- Built-in delay prevents nuisance alarms.
- Latching activation indicator.
- Form C dry contacts automatically restore
when phone line is restored.
Listings: UL
Power Requirements: 12 VDC at 20 mA
(inactive), I00 mA (active).
Phone Line Input: Monitors normal
48-52 VDC present on phone line. Activates 40 to 60 seconds after phone
line is detected in fault. Faulted line will be detected when phone line
voltage falls below 1 VDC and will restore when voltage returns above
3 VDC.
Input Impedance: 10 megohm.
Output: Form C dry contacts rated
at 12 VDC/3 amps. Auto reset on phone line restoral.
Indicator: Activation LED reset with
manual reset button.
Dimensions: 6 3/8 inch x 2 1/8 inch
x 1 5/8 inch (16.2 cm x 5.4 cm x 4.1 cm).
Shipping Weight: 1 lb.
FCC Registration Number: AC698R-67362-MO-N
Ringer Equivalence: 0.1 B
Downloads:
Model 7810
Furnace Failure Detector
The 7810 furnace failure detector
is a small, inexpensive fixed temperature thermostat that provides contact
closure at 40F.
In reality, a homeowner can have more damage
on their hands from a furnace going out than from a break-in. If a furnace
fails unnoticed on a cold day or night, anything in the house that holds
water-sinks, pipes, radiators, toilets, dishwashers-can freeze and burst,
creating significant repair and replacement costs. In just a matter of
hours, a house can have serious problems if its furnace shuts down during
the winter. With a 7810 installed, a central station can be alerted to
the problem in order to correct the situation and head off repair problems.
Features
- No external power required.
- Simple, two wire connection.
- Automatically restores to normal when
temperature problem corrected.
Activation Temperature: 40F.
Output: Normally open dry contact
(close on alarm). Self-resetting.
Downloads:
5000
Series Telephone Entry Control Systems
 |
 |
| 5083
Handsfree |
5084
Handset |
Silent Knight opens
the door to low-cost, full-capacity entry controls that can be mounted
indoors or out.
Reliable entry control for large, multi-tenant
buildings doesn't have to cost a small fortune. Silent Knight's 5000 Series
entry control system delivers reliable, weather-resistant performance
at a price no comparable system can match. The 5000 series entry system
is perfect for commercial and residential complexes, and gated communities
needing entry access. The easy-to-install indoor/outdoor design requires
only a single phone line, and it's built tough to maintain its peak performance
and good looks for years even under the harshest conditions. No other
system works so hard to protect your facility and your budget.
Features
- Downloadable with SKSS Silent Knight Software
Suite
- Only resident-side telephones will open
system doors
- Door-strike time lengths are programmable
to fit the environment
- Programmable user codes for keyless entry
(4 - 6 digits)
- All tenant phone numbers remain confidential
- System options and user information are
stored in flash memory for instant recovery after total power loss
- Postal lock installation provisions
- 20 digit dialing capability
- Simple programming through built-in touchpad
- 1,000 occupant capacity out of the box.
No expansion chips required.
- Each 5083/5084 can be configured as a
master or a slave (satellite) unit. Only one master per system.
- Up to four slave (satellite) units can
be connected to the master unit to cover multiple entry points, sharing
a single phone line.
- Handsfree (5083) and Handset (5084) models
- Built-in touchtone and/or time window
controlled auxiliary relay
- Large backlit LCD display
- Surface or flush mountable
- Vandal-resistant and rust-resistant stainless
steel cabinets
- Braille touchpads
- Four different greeting messages to choose
from
Downloads:
|
